← Vulnerability feed

Vulnerability record · CVE-2026-54874 · published 25 August 2026

CVE-2026-54874: Openssl vulnerability

OOpenssl · Openssl

Issue summary: Receiving a DTLS record for a future epoch while a handshake is in progress causes OpenSSL to buffer far more memory than the record itself requires. Impact summary: A peer can use a small amount of network traffic to make an OpenSSL DTLS endpoint retain a disproportionately large amount of memory, which may lead to a Denial of Service. CWE: CWE-405: Asymmetric Resource Consumption (Amplification) Description: While a DTLS handshake is in progress, a peer may legitimately have already moved on to the next epoch (for example, having sent its ChangeCipherSpec and Finished messages) before the local endpoint has processed the same transition, typically because of reordering on the underlying UDP transport. OpenSSL buffers such early records so that they can be processed once the local endpoint catches up. Buffering a record currently retains the entire read buffer it arrived in, which is sized to hold the largest possible DTLS record (around 16 kilobytes), rather than just the bytes that make up the record itself. Up to 100 such records may be buffered per connection. As a result, a peer that sends a stream of small forged records claiming to belong to the next epoch can cause an OpenSSL DTLS endpoint to retain around 1.7 megabytes of memory, despite sending only a small fraction of that amount of data over the network. An attacker therefore gains a memory amplification factor of around 1200, and can multiply the effect across as many associations as it is able to open, making this a remote memory exhaustion Denial of Service risk for DTLS servers. Since the memory retained per connection remains bounded, and any limit an application already places on the number of concurrent associations also bounds the total exposure, this issue has been assessed as Low severity. FIPS impact: no No FIPS modules are affected by this issue as the affected code is outside the OpenSSL FIPS module boundary. OpenSSL 4.0, 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. OpenSSL 4.0 users should upgrade to OpenSSL 4.0.2. OpenSSL 3.6 users should upgrade to OpenSSL 3.6.4. OpenSSL 3.5 users should upgrade to OpenSSL 3.5.8. OpenSSL 3.4 users should upgrade to OpenSSL 3.4.7. OpenSSL 3.0 users should upgrade to OpenSSL 3.0.22. Premium support customers only: OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1zi OpenSSL 1.0.2 users should upgrade to OpenSSL 1.0.2zr This issue was reported on 18 May 2026 by Amazon Web Services. The fix has been developed by Matt Caswell. -- cut (non-publishing metadata for internal use) -- Reported by: Amazon Web Services Fixed by: Matt Caswell

7.5 CVSS 3.1 High EPSS 1.3% · top 30.5% CWE-405 · CWE-405
7.5CVSS 3.1 base score
1.3%EPSS exploitation probability, 30 days
NoNot in CISA KEV
1Affected product versions listed by NVD
6References
11 Sep 2026Last modified by NVD

Description

Issue summary: Receiving a DTLS record for a future epoch while a handshake is in progress causes OpenSSL to buffer far more memory than the record itself requires. Impact summary: A peer can use a small amount of network traffic to make an OpenSSL DTLS endpoint retain a disproportionately large amount of memory, which may lead to a Denial of Service. CWE: CWE-405: Asymmetric Resource Consumption (Amplification) Description: While a DTLS handshake is in progress, a peer may legitimately have already moved on to the next epoch (for example, having sent its ChangeCipherSpec and Finished messages) before the local endpoint has processed the same transition, typically because of reordering on the underlying UDP transport. OpenSSL buffers such early records so that they can be processed once the local endpoint catches up. Buffering a record currently retains the entire read buffer it arrived in, which is sized to hold the largest possible DTLS record (around 16 kilobytes), rather than just the bytes that make up the record itself. Up to 100 such records may be buffered per connection. As a result, a peer that sends a stream of small forged records claiming to belong to the next epoch can cause an OpenSSL DTLS endpoint to retain around 1.7 megabytes of memory, despite sending only a small fraction of that amount of data over the network. An attacker therefore gains a memory amplification factor of around 1200, and can multiply the effect across as many associations as it is able to open, making this a remote memory exhaustion Denial of Service risk for DTLS servers. Since the memory retained per connection remains bounded, and any limit an application already places on the number of concurrent associations also bounds the total exposure, this issue has been assessed as Low severity. FIPS impact: no No FIPS modules are affected by this issue as the affected code is outside the OpenSSL FIPS module boundary. OpenSSL 4.0, 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. OpenSSL 4.0 users should upgrade to OpenSSL 4.0.2. OpenSSL 3.6 users should upgrade to OpenSSL 3.6.4. OpenSSL 3.5 users should upgrade to OpenSSL 3.5.8. OpenSSL 3.4 users should upgrade to OpenSSL 3.4.7. OpenSSL 3.0 users should upgrade to OpenSSL 3.0.22. Premium support customers only: OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1zi OpenSSL 1.0.2 users should upgrade to OpenSSL 1.0.2zr This issue was reported on 18 May 2026 by Amazon Web Services. The fix has been developed by Matt Caswell. -- cut (non-publishing metadata for internal use) -- Reported by: Amazon Web Services Fixed by: Matt Caswell

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Affected products

1 vulnerable configurations from NVD's CPE data, grouped by vendor and product.

References

Track CVE-2026-54874 inside VULONE

Watch it alongside the ransomware crews, C2 infrastructure and forum chatter that reference it, query it through the API and pull it into your SIEM over TAXII.

Start free Open in platform

Related vulnerabilities

Same products first, then exploited flaws of the same weakness class.

7.5CVE-2014-0160OpenSSL TLS/DTLS Heartbeat Extension Out-of-Bounds Read (Heartbleed)OpenSSL 1.0.1 before 1.0.1g mishandles Heartbeat Extension packets in its TLS and DTLS implementations, causing an out-of-bounds read of process memo…KEVEPSS 100%analysed10.0CVE-2009-3245Openssl improper input validation vulnerabilityOpenSSL before 0.9.8m does not check for a NULL return value from bn_wexpand function calls in (1) crypto/bn/bn_div.c, (2) crypto/bn/bn_gf2m.c, (3) c…EPSS 6.5%10.0CVE-2006-3738OpenSSL SSL_get_shared_ciphers buffer overflow via long cipher listOpenSSL versions before 0.9.7l and 0.9.8d contain a buffer overflow in the SSL_get_shared_ciphers function, triggered by a long list of ciphers. The …EPSS 49%analysed9.8CVE-2026-63073Openssl vulnerabilityIssue summary: OpenSSL CMP response validation passed an unexpected response sender distinguished name directly as the format string to `ERR_raise_da…EPSS 1.2%9.8CVE-2026-31789Openssl out-of-bounds write vulnerabilityIssue summary: Converting an excessively large OCTET STRING value to a hexadecimal string leads to a heap buffer overflow on 32 bit platforms. Impact…EPSS 0.33%9.8CVE-2022-2274OpenSSL 3.0.4 RSA AVX512IFMA memory corruptionOpenSSL 3.0.4 introduced a bug in the RSA implementation for X86_64 CPUs supporting AVX512IFMA instructions, causing 2048-bit private key operations …EPSS 46%analysed9.8CVE-2021-3711OpenSSL SM2 decryption buffer overflowOpenSSL's SM2 decryption code miscalculates the output buffer size needed by EVP_PKEY_decrypt(), so the first sizing call can return a value smaller …EPSS 88%analysed9.8CVE-2016-6309OpenSSL 1.1.0a statem use-after-free on realloc in TLS session handlingOpenSSL 1.1.0a's statem/statem.c fails to account for memory-block movement after a realloc call, leaving a dangling pointer that can be used after f…EPSS 70%analysed

Source: NIST National Vulnerability Database (record CVE-2026-54874), CISA KEV, FIRST EPSS (scores of 2026-09-27). This page is refreshed as NVD updates the record.